Korg Electronic Keyboard, Руководство по параметрам

Страница: 419 / 1127

Combination: Page Menu Commands Initialize KARMA Module
409
In addition to the content copied when “GE RTP
Control Setting & Scenes” is Off (unchecked), the
following content is copied.
• 7–5: GE RTP page “ASSIGN” and
Polarity
settings.
• The scene selected in the master buffer (A), the
KARMA CONTROLS slider and KARMA SWITCH
settings of each scene (0–6d: Realtime Controls and
0–9f: R.Time Knobs/KARMA settings).
• 7–8: Name/Note Map controller name settings.
If you turn “Perf. RTP & Panel Setting” On
(checked)
In addition to the content copied when “Perf. RTP &
Panel Settings” is Off (unchecked), the following
content is copied.
•
Tempo
setting.
•
Time Signature
setting.
• KARMA ON/OFF switch setting.
• KARMA LATCH switch setting.
• 7–6: Perf Real– Time Parameters page settings.
• 7–7: Dynamic MIDI page settings.
When copying from a combination or song
If “GE RTP Control Setting & Scenes” and “Perf. RTP &
Panel Settings” are Off (unchecked) when you copy
from a combination or song, the following content is
copied.
• The GE selected for the copy-destination KARMA
module (including the GE realtime parameters).
• KARMA module parameters (7–3: Module
Parameter-Trigger, 7–4: Module Parameter-
Control).
• 7–5: GE RTP page “MIN,” “MAX,” and “VALUE”
settings.
If you turn “GE RTP Control Setting & Scenes”
On (checked)
In addition to the content copied when “GE RTP
Control Setting & Scenes” is Off (unchecked), the
following content is copied.
• 7–5: GE RTP page “ASSIGN” and
Polarity
settings.
• The KARMA CONTROLS slider and KARMA
SWITCH settings of each scene in the copy-source
buffer, and the currently selected scene.
• 7–8: Names/Note Map controller name settings.
If you turn “Perf. RTP & Panel Setting” On
(checked)
In addition to the content copied when “Perf. RTP &
Panel Settings” is Off (unchecked), the following
content is copied.
•
Tempo
setting.
•
Time Signature
setting.
• KARMA ON/OFF switch setting.
• KARMA LATCH switch setting.
• KARMA Module Control switch setting.
• 7–6: Perf Real– Time Parameters page settings.
• 7–7: Dynamic MIDI Page settings.
The “Input Channel” and “Output Channel”
(Combination/Sequencer P7–1) settings of a
combination or song are not copied.
Initialize KARMA Module
This command initializes the settings of the KARMA
Module.
The GE selection will not be initialized. The GE
parameter “Values” will be set to the default values
that are preset for the selected GE.
1. Select “Initialize KARMA Module” to open the
dialog box.
2. In “To,” select the KARMA Module that you wish
to initialize. If you select All, all KARMA
Modules A, B, C, and D will be initialized.
3. According to the content you want to initialize,
you can turn “GE RTP Control Settings & Scenes”
and/or “Pref. RT & Panel Setting” ON (checked).
(See p.128 “Settings initialized by Initialize
KARMA Module”)
The KARMA CONTROLS slider and KARMA
SWITCH settings and names in each master buffer
are initialized as when the “Pref. RT & Panel
Setting” option is On (checked).
4. To initialize the settings, press the OK button. To
cancel without initializing, press the Cancel
button.
Copy Scene
Please see “Copy Scene” on page 147.
Swap Scene
Please see “Swap Scene” on page 147.
Capture Random Seed
Please see “Capture Random Seed” on page 147.
Auto Assign KARMA RTC Name
This command is available on the KARMA GE tab of
the Play page, and the Name/Note Map tab of the
KARMA page.
For more information, please see “Auto Assign
KARMA RTC Name” on page 139.