manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Program mode: EXi

160

Chord

Chord

[Off, Bsc, Adv]

Off

 disables the Chord function.

Bsc

 (Basic) re-creates the chord mode of the KORG 

Polysix. Each time you play a new chord, it will cut off 
the previous chord. This option ignores the Voice 
Assign settings.

Adv 

(Advanced) uses the Program’s Voice Assign 

settings, as if each note in the chord was a transposed 
set of oscillators layered within the Program. 

Poly, Poly Legato, Single Trigger, Mono, Mono Legato, 
Legato Offset, Mono Priority, and Mono and Poly 
Unison all apply.

You can achieve the same effect as 

Bsc

, above, by 

setting 

Chord

 to 

Advanced

, 

Voice Assign

 to 

Mono

, 

Priority

 to 

Last Note

, and 

Legato

 to 

Off

.

For more information, see “Using Chord mode” on 
page 49 of the Operation Guide.

Source Pad

[1...8]

Chord mode uses the chords assigned to the Pads. This 
selects which of the Pads to use. You can also choose 
chords using the Pads themselves; for more 
information, see “Selecting chords” on page 51 of the 
Operation Guide.

Unison

Unison

[On, Off]

Unison can be used in both 

Mono

 and 

Poly

 modes.

On (checked):

 When Unison is on, the Program uses 

two or more stacked, detuned voices to create a thick 
sound. 

Use the 

Number of Voices

 and 

Detune

 parameters to 

set the number of voices and amount of detuning, and 
the 

Thickness

 parameter to control the character of the 

detuning.

Off (unchecked):

 The Program plays normally. If 

Unison

 is 

Off

, then all of its associated parameters are 

grayed out. 

Number of voices

[2…16]

This controls the number of detuned voices that will be 
played for each note when using 

Unison

. It applies 

only when 

Unison

 is 

On

.

Stereo Spread

[0...100]

Stereo Spread

 lets you create a wider stereo field when 

using 

Unison

. It applies only when 

Unison

 is 

On

.

This feature separates the different Unison voices into 
two groups. One group is panned to the left, and the 
other to the right. At 

0

, both groups will be in the 

center; at 

100

, the two groups will be hard-panned left 

and right, respectively; at intermediate values, they 
will be panned to intermediate left and right positions.

If there is an odd number of voices, one voice will be 
panned to the center.

If the voices are true stereo, 

Stereo Spread

 “steers” the 

stereo image of each voice, similar to MIDI Pan 
(CC#10) and the Control Surface Pan knobs. In this 

case, intermediate settings of 

Stereo Spread

 may be 

the most effective, since they will still preserve some of 
the original stereo image.

Unison detuning is spread as evenly as possible across 
the left and right channels. The lowest voice will be on 
the left, and the highest on the right; the next-lowest on 
the left, and the next-highest on the right, etc., as 
below:

-14 cents: L

+14 cents: R

-10 cents: L

+10 cents: R etc.

Depending on the 

Thickness

 setting, the detuning 

may lean slightly to one side.

Detune

[00…200 cents]

Detune is available when 

Unison

 is 

On

. 

This parameter sets the tuning spread for the Unison 
voices, in cents (1/100 of a semitone). The 

Thickness

 

parameter, below, controls how the voices are 
distributed across the detune amount. When 

Thickness

 is 

Off

, the voices are distributed evenly, 

centered around the basic pitch. 

For instance, let’s say that the 

Number of voices

 

parameter is set to 

3

, 

Detune

 is set to 

24

, and 

Thickness

 is 

Off

:

Voice one will be detuned down by 12 cents, voice two 
will not be detuned, and voice three will be detuned 
up by 12 cents.

As another example, let’s say that 

Detune

 is still set to 

24

 and 

Thickness

 is still 

Off

, but 

Number of voices

 is 

set to 

4

:

Voice one will still be detuned down by 12 cents, voice 
two will be detuned down by 4 cents, voice three will 
be detuned up by 4 cents, and voice 4 will be detuned 
up by 12 cents.

Thickness

[Off, 01…09]

Thickness is available when 

Unison

 is 

On

. 

This parameter controls the character of the detuning 
for the unison voices.

Off: 

Unison voices will be evenly distributed across 

the Detune range, as shown above.

Voice

Detune

1

–12

2

0

3

+12

Voice

Detune

1

–12

2

–4

3

+4

4

+12

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Ultra Start KE-6 Owner'S Manual preview
KE-6
Бренд: Ultra Start Страницы: 8
Kogan KAWKBBTAPLA User Manual preview
KAWKBBTAPLA
Бренд: Kogan Страницы: 5
NCR 6932-2201-9090 User Manual preview
6932-2201-9090
Бренд: NCR Страницы: 60
Waeco MagicWatch MW150 Installation And Operating Manual preview
MagicWatch MW150
Бренд: Waeco Страницы: 144
NAKTO LCD-M5 Instructions Manual preview
LCD-M5
Бренд: NAKTO Страницы: 6
WAGNER Evobell 3500 Translation Of The Original Operating Manual preview
Evobell 3500
Бренд: WAGNER Страницы: 88
Denver GKK330 Manual preview
GKK330
Бренд: Denver Страницы: 21
SILITEN DK-7000BT User Manual preview
DK-7000BT
Бренд: SILITEN Страницы: 9
Bosch LTC 2601/00 Instruction Manual preview
LTC 2601/00
Бренд: Bosch Страницы: 2
Bosch IntuiKey Series Installation Manual preview
IntuiKey Series
Бренд: Bosch Страницы: 32
Bosch LTC 8555/00 Instruction Manual preview
LTC 8555/00
Бренд: Bosch Страницы: 40
Bosch IntuiKey Series User Manual preview
IntuiKey Series
Бренд: Bosch Страницы: 50
Sejin Electron SKR-2006 User Manual preview
SKR-2006
Бренд: Sejin Electron Страницы: 9
STEAMAX PROTANK 4 User Manual preview
PROTANK 4
Бренд: STEAMAX Страницы: 44
STEAMAX TFV8 X-BABY User Manual preview
TFV8 X-BABY
Бренд: STEAMAX Страницы: 87
Echomaster CL-FT1 Installation Manual preview
CL-FT1
Бренд: Echomaster Страницы: 9
Toyota Dynamic Laser Cruise Control System Quick Training Manual preview
Dynamic Laser Cruise Control System
Бренд: Toyota Страницы: 22
Leicke 4050296540854 User Manual preview
4050296540854
Бренд: Leicke Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды