manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Program P7: KARMA    7–4: Module Parameters-Trigger

109

Note

Note Trigger

[Any, AKR, 1st, Dyn]

Any (Any Note + Dynamic MIDI): 

Every note-on will 

cause triggering; i.e., each note-on will cause the 
phrase or pattern to restart from the beginning.

AKR (1st Note After Key R Dynamic MIDI):

 

Triggering will occur when the first note-on occurs 
from a state in which no keys are “on.” Triggering will 
not occur if even one note is being pressed. By 
changing the chord you play on the keyboard while 
holding at least one note, you can change the notes of 
the phrase or pattern without triggering.

1st (1st Only Until Module Stops + Dynamic MIDI): 

After KARMA function is turned on, only the first 
note-on will cause triggering. Subsequent note-ons will 
not cause triggering.

This is useful for drum grooves and phrases where you 
do not want subsequent chord changes to restart the 
phrase.

Dyn (Dynamic MIDI): 

Triggering will be produced by 

operating the controller specified by Dynamic MIDI 
(Program 7–7). In this case, note-ons will not cause 
triggering.

Note: With any of these settings, the trigger will be 
applied by operations of the controller specified for 
Dynamic MIDI (Program 7–7), if “Destination” is set to 

Trigger Notes&Envs

, 

Trigger Note

 (see “Dynamic 

MIDI Sources & Destinations” on page 984).

Note Latch

[Off, On]

Specifies whether the phrase or pattern will continue 
when you release your hand from the keyboard (

latch 

on

) or whether the phrase or pattern will stop (

latch 

off

). In Program mode, turn this 

On (checked)

 and use 

the LATCH switch to control latch on/off.

Off (unchecked): 

Latch will be off regardless of the 

LATCH switch on/off status.

On (checked):

 The LATCH switch will control latch 

on/off.

When the LATCH switch is 

off

 (LED dark), 

latch is off

.

When the LATCH switch is 

on

 (LED lit), 

latch is on

.

Note: In Combination and Sequencer mode, up to four 
KARMA Modules can be used. In these modes, you 
can turn “Note Latch” on/off independently for each 
KARMA Module. If you use “Copy KARMA Module” 
to copy KARMA Module settings from these modes to 
a program, there may be cases in which the setting here 
will be 

off

, so that latch-on will not occur even if you 

turn 

on

 the LATCH switch. In such cases, turn this 

on

.

Envelope1, Envelope2, Envelope3

Each GE provides three Envelopes. They can produce 
time-variant control of velocity, tempo, duration, pitch 
bend, and various control changes.

You can specify triggering conditions and latch 
conditions for each of the three Envelopes of the GE, 
separately from the Note Trigger and Latch (although 
many times you will want them to be the same.)

If the selected GE does not use Envelopes, these 
settings will have no effect. For information on 
specific GEs, please see the “Voice Name List” on 
page 1041.

Envelope Trigger

[Any, AKR, 1st, Dyn]

Any (Any Note + Dynamic MIDI): 

Every note-on will 

cause triggering; i.e., each note-on will cause the 
envelope to start from the beginning.

AKR (1st Note After Key R Dynamic MIDI): 

Triggering will occur when the first note-on occurs 
from a state in which no keys are “on.” Retriggering 
will not occur if even one note is being pressed.

1st (1st Only Until Module Stops + Dynamic MIDI): 

After KARMA is turned on, only the first note-on will 
cause triggering. Subsequent note-ons will not cause 
triggering.

Dyn (Dynamic MIDI): 

Triggering will be produced by 

operating the controller specified by Dynamic MIDI 
(Program 7–7). In this case, note-ons will not cause 
triggering.

Note: For any of these settings, triggering will be 
applied by operations of the controller specified for 
Dynamic MIDI, if “Destination” is set to 

Trigger 

Notes&Envs

, 

Trigger Env1…Trigger Env3

.

Envelope Latch

[Off, Sus1, Rel1, Sus2, Rel2]

Off: 

The envelope will not be latched. When all keys 

are released or a Dynamic MIDI trigger is released 
(note-off), the envelope will move to the release 
segment.

Sus1:

 Once the envelope is started, it will proceed 

through attack 

→

 decay 

→

 sustain 

→

 release. If note-

off occurs before the envelope reaches the sustain level, 
the envelope will not begin the release immediately 
but wait until after reaching the sustain level. Even in 
the case of a note for which the note-on/off interval is 
short, the envelope will proceed through attack 

→

 

decay 

→

 sustain 

→

 release as if the key was being held 

for a longer time. If the envelope reaches the sustain 
level before receiving note-off, it will hold at the 
sustain level (the same operation as for the Off setting). 
If the note-off occurs after the envelope reaches the 
sustain level, the envelope will begin the release when 
note-off occurs (the same operation as for the Off 
setting).

Rel1:

 Once the envelope has started, it will proceed 

through attack 

→

 decay 

→

 release, regardless of when 

the note-off occurs. Even if a key is being pressed, the 
envelope will ignore sustain, and will proceed 
immediately to the release.

Sus2: 

The envelope will ignore note-off, and will 

proceed through attach 

→

 decay 

→

 sustain. Therefore, 

this setting will never reach the release portion. Other 
operation is the same as for 

Sus1

.

Rel2:

 The same operation as 

Rel1

, except will ignore 

note-off for the purpose of looping, as explained below.

The envelope can be set to repeat as a loop as part of 
the GE. A looped envelope will be controlled as 
follows.

For Sus1 and Rel1, 

the envelope will continue 

repeating as long as the key is held.

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

A-Champs ROX User Manual preview
ROX
Бренд: A-Champs Страницы: 19
Kawai WK 40 Owner'S Manual preview
WK 40
Бренд: Kawai Страницы: 8
Kinesis Advantage2 LF User Manual preview
Advantage2 LF
Бренд: Kinesis Страницы: 39
Epomaker TH21 Quick Start Manual preview
TH21
Бренд: Epomaker Страницы: 24
Razer RZ03-04500200-R3U1 Manual preview
RZ03-04500200-R3U1
Бренд: Razer Страницы: 25
Technics SX-KN200 Owner'S Manual preview
SX-KN200
Бренд: Technics Страницы: 19
iPazzPort KP-810-18R User Manual preview
KP-810-18R
Бренд: iPazzPort Страницы: 5
Huawei Hall Quick Manual preview
Hall
Бренд: Huawei Страницы: 19
Honeywell Intermec CV41 User Manual preview
Intermec CV41
Бренд: Honeywell Страницы: 118
Roccat Sova Quick Installation Manual preview
Sova
Бренд: Roccat Страницы: 2
Trust 19029 Quick Installation Manual preview
19029
Бренд: Trust Страницы: 75
Vakoss TK-558BK Quick Start Manual preview
TK-558BK
Бренд: Vakoss Страницы: 4
CAVE K20 Quick Setup Manual preview
K20
Бренд: CAVE Страницы: 4
Energetics E-102 User Manual preview
E-102
Бренд: Energetics Страницы: 330
Peavey DPM C8 User Manual preview
DPM C8
Бренд: Peavey Страницы: 48
IBM 3277 Troubleshooting Manual preview
3277
Бренд: IBM Страницы: 124
Vivo MOUNT-KB07B Instruction Manual preview
MOUNT-KB07B
Бренд: Vivo Страницы: 4
Cherry KC 1068 Quick Start Manual preview
KC 1068
Бренд: Cherry Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды