manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

MIDI applications    Messages transmitted and received by the OASYS

1009

The CC# settings for the pads are made in the Global 
P2– Controller page. Normally you will leave these 
Off. However, you can edit these settings if you need to 
assign MIDI control change messages to the pads, such 
as when you want to record pad operations on the 
internal sequencer or an external MIDI sequencer, or to 
control the pads from an external MIDI device.

These messages are transmitted and received if the 
Global P1– MIDI page parameter “Pads MIDI Out” 
is set to Pad CC/Note. If “Pads MIDI Out” is set to 
Chord Notes, the “Pad Chords” setting made in 
each program, combination, song, or in Sampling 
mode will be transmitted.

Each pad can be assigned any MIDI control change 
CC#00–CC#119, or a desired MIDI note number. 
However, you will normally use the default settings 
that are assigned when you execute the page menu 
command “Reset Controller MIDI Assign” with CC 
Default. For more information, see “Reset Controller 
MIDI Assign” on page 687.

The operations described below are for these CC 
Default settings.

PAD1 trigger velocity (CC#110) [Bn, 6E, vv]
PAD2 trigger velocity (CC#111) [Bn, 6F, vv]
PAD3 trigger velocity (CC#112) [Bn, 70, vv]
PAD4 trigger velocity (CC#113) [Bn, 71, vv]
PAD5 trigger velocity (CC#114) [Bn, 72, vv]
PAD6 trigger velocity (CC#115) [Bn, 73, vv]
PAD7 trigger velocity (CC#116) [Bn, 74, vv]
PAD8 trigger velocity (CC#117) [Bn, 75, vv]

(n: channel, vv: pad velocity)

These correspond to pads 1–8. When you strike one of 
the OASYS’ pads, the PAD 1–8 trigger velocity will be 
transmitted. The same result will occur when these 
messages are received.

Silencing all notes on a specific channel

All note off (CC#123) [Bn, 7B, 00] (value 00)

When this is received, all currently-sounding notes on 
that channel will be turned off (as though the keys had 
been released). However, the release portion of the 
notes will remain.

All sound off (CC#120) [Bn, 78, 00] (value 00)

When this is received, all currently-sounding notes on 
that channel will be silenced. While the All Note Off 
message allows the release portion of the notes to 
remain, the All Sound Off message will silence the 
notes immediately.

However, these messages are provided for emergency 
use, and are not something that you will use while 
performing.

Resetting all controllers on a specific channel

Reset all controllers (CC#121) [Bn, 79, 00] (value 00)

When this is received, the value of all controllers on 
that channel will be reset.

Using RPN (Registered Parameter 
Numbers)

RPN (Registered Parameter Numbers) are a type of 
message that allow settings to be made in a way that is 
common between instrument manufacturers. (NRPN 

(Non-registered Parameter Numbers) and exclusive 
messages can be freely used in non-compatible ways 
by different manufacturers and models of instrument.)

RPN messages can be used for editing with the 
following procedure.

1. Use RPN MSB (CC#101) [Bn, 65, mm] and RPN 

LSB (CC#100) [Bn, 64, rr] (n: channel, mm, rr: 
upper and lower bytes of the parameter number) 
messages to select the parameter.

2. Use data entry MSB (CC#6) [Bn, 06, mm] and data 

entry LSB (CC#38) [Bn, 26, vv] (n: channel, mm, vv: 
upper and lower bytes of the value, together 
expressing 16,384 levels) to specify the value.

3. You can use data increment (CC#96) [Bn, 60, 00] or 

data decrement (CC#97) [Bn, 61, 00] (n: channel, 
value is 

fi

xed at 00) to change the value in steps of 

one.

The OASYS can receive the following three RPN 
messages (tuning, transpose, and pitch bend range).

Tuning

RPN 

fi

ne tune [Bn, 65, 00, 64, 01]

This RPN message can be used to adjust the detuning 
for a program or timbre (in Combination mode), or for 
a track (in Sequencer mode).

The procedure is as follows.

1. [Bn, 65, 00, 64, 01]: Select RPN parameter 01.
2. [Bn, 06, mm, 26, vv]: Use data entry to set the value. 

A value of 8192 [mm, vv=40, 00] is center, 0 [mm, 
vv=00, 00] is -100 cents, and 16383 [mm, vv=7F, 7F] 
is +99 cents.

Note:

 You can use the universal exclusive Fine Tune 

message to adjust the overall tuning that corresponds 
to the “Master Tune” (Global P0: 0–1a) parameter. (See 
“About system exclusive messages” 

☞

p.1010)

Transposing

RPN coarse tune [Bn, 65, 00, 64, 02]

This RPN message can be used to adjust the 
transposition for a program or timbre (in Combination 
mode), or for a track (in Sequencer mode).

The procedure is as follows.

1. [Bn, 65, 00, 64, 02]: Select RPN parameter 02.
2. [Bn, 06, mm, 26, vv]: Use data entry to set the value. 

Normally only the upper byte is used.

A value of 8192 [mm, vv=40, 00] is center, 6656 [mm, 
vv=34, 00] is –12 semitones, and 9728 [mm, vv=4C, 00] 
is +12 semitones.

Note:

 You can use the universal exclusive Coarse Tune 

message to adjust the overall tuning that corresponds 
to the “Transpose” (Global P0: 0–1a) parameter. (See 
“About system exclusive messages” 

☞

p.1010)

Changing the pitch bend range

RPN pitch bend range [Bn, 64, 00, 65, 00]

This RPN message can be used to adjust the pitch bend 
range for a program or timbre (in Combination mode) 
or for a track (in Sequencer mode).

The procedure is as follows.

1. [Bn, 65, 00, 64, 00]: Select RPN parameter 00.

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Casio CDP-130 Service Manual & Parts Manual preview
CDP-130
Бренд: Casio Страницы: 42
70mai UP03 User Manual preview
UP03
Бренд: 70mai Страницы: 47
Behavior Tech Computer KB9001URF User Manual preview
KB9001URF
Бренд: Behavior Tech Computer Страницы: 28
Franklin Bookman DBP-2076 User Manual preview
Bookman DBP-2076
Бренд: Franklin Страницы: 21
Hama K 406 Operating Instruction preview
K 406
Бренд: Hama Страницы: 4
Trust SILVERLINE 302KS User Manual preview
SILVERLINE 302KS
Бренд: Trust Страницы: 10
Wireless Computing RF-240 Operating Instructions preview
RF-240
Бренд: Wireless Computing Страницы: 2
Genesis Rhod 400 Quick Installation Manual preview
Rhod 400
Бренд: Genesis Страницы: 10
Genesis Rhod 600 RGB Quick Installation Manual preview
Rhod 600 RGB
Бренд: Genesis Страницы: 10
Genesis THOR660 Quick Installation Manual preview
THOR660
Бренд: Genesis Страницы: 24
Roland BK-5OR Owner'S Manual preview
BK-5OR
Бренд: Roland Страницы: 134
GSKILL RIPJAWS KM780 RGB User Manual preview
RIPJAWS KM780 RGB
Бренд: GSKILL Страницы: 45
Tomahawk COACH BY COLOR Manual preview
COACH BY COLOR
Бренд: Tomahawk Страницы: 44
i3 International i3C762 User Manual preview
i3C762
Бренд: i3 International Страницы: 2
Gear Head KB3700TP User Manual preview
KB3700TP
Бренд: Gear Head Страницы: 4
Waeco MagicWatch MW650 Installation And Operating Manual preview
MagicWatch MW650
Бренд: Waeco Страницы: 196
Rand McNally OverDryve Quick Start Manual preview
OverDryve
Бренд: Rand McNally Страницы: 20
YATOUR YT-M08 Installation Instructions Manual preview
YT-M08
Бренд: YATOUR Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды