Dimension
JetNet 6528Gf Industrial 28G Full Gigabit Managed Ethernet Switch
dimension (W x H x D) is 44mm(H) x 438mm (W) x 375mm (D). ble.
Mount the Switch to 19’’ rack
1. Attach the brackets to the device by using
the screws provided in the Rack Mount kit.
2. Mount the device in the 19’ rack by using
four rack-mounting screws provided by the
rack manufacturer.
3. When installing multiple switches, mount
them in the rack one below the other.
Note:
Check if the rack environment temperature conforms to the specified
operating temperature range. Do not place any equipment on top of the switch
and please properly grounded
JetNet 6528Gf Series Industrial 28G Full Gigabit Managed Ethernet Switch
Quick Installation Guide V1.0
Overview
Interface Introduction
Installation
Front-Panel Components
The front panel includes RJ-45 based RS-232 Console Port, USB port, System
& Port LEDs, Gigabit Ethernet Port Interfaces and Gigabit Combo Port
Interfaces.
Back-Panel Components
The back panel of the JetNet 6528Gf Industrial 28G Full Gigabit Managed
Ethernet Switch consists of AC power input, DC power Input and Relay
Output depend on different Model.
JetNet 6528Gf-2AC:
JetNet 6528Gf-2DC24:
The JetNet 6528Gf Series is a 19-inch Industrial 28G Full Gigabit Managed
Ethernet Switch equipped with 24 100/1000TX, 8 100/1000 RJ-45/SFP
combo ports, 4 GbE SFP ports.
Package Check List
The Rack Mount Managed Ethernet Switch
Console cable
Rack Mount kit
Power Cord (Depend on Country, JetNet 6528Gf-2DC24 no Power Cord)
QIG
LED Indicators
Model Name
Description
JetNet 6528Gf-
AC
24 100/1000TX, 8 100/1000 RJ-45/SFP combo ports, 4 GbE SFP ports,
Ind. full Gigabit Managed Ethernet Switch, -40~75°C, AC power
JetNet 6528Gf-
2AC
24 100/1000TX, 8 100/1000 RJ-45/SFP combo ports, 4 GbE SFP ports,
Ind. full Gigabit Managed Ethernet Switch, -40~75°C, dual AC power
JetNet 6528Gf-
AC-DC24
24 100/1000TX, 8 100/1000 RJ-45/SFP combo ports, 4 GbE SFP ports,
Ind. full Gigabit Managed Ethernet Switch, -40~75°C, AC and DC power
JetNet 6528Gf-
2DC24
24 100/1000TX, 8 100/1000 RJ-45/SFP combo ports, 4 GbE SFP ports,
Ind. full Gigabit Managed Ethernet Switch, -40~75°C, dual DC power
LED
Color
Function
PWR
Green
Power (AC1, AC2, DC1, DC2) on
Alarm
Red
Power failure, port failure, ping failure, login
failure, RSR topology change
R.S.
Lit Green
MSR in Normal State
Lit Yellow
MSR in Abnormal State
Not Lit
MSR function not active
Flashes Green
Incorrect configuration of MSR, ex. ring not
connected to ring port
Flashes
Yellow
The break has been detected to be local to one
of the ports
Sys
Green
System on
G1-G24 Copper
LNK/ACT
Lit Green
10/100/1000 RJ-45 Link
Flashes Green
10/100/1000 RJ-45 Activity
G1-G24 Copper
Speed
Yellow on
1000Mbps
Yellow off
10/100Mbps
G17-G28 SFP
LNK/ACT
Lit Green
Link
Flashes Green
Activity
Power the unit and connect to network Cable
AC Power Input : connect the attached power cord to the AC power input
connector, the available AC power input is range from 90-264VAC.
DC Power Input: the suggested power input is 24VDC, the available range is
from 18-36VDC.
Follow below steps to wire JetNet 6528Gf redundant DC power inputs.
1. Insert positive and negative wires into V+ and V- contacts respectively of
the terminal block connector.
2. Tighten the wire-clamp screws to prevent DC wires from being loosened.
3. DC1 and DC2 support polarity reverse protection functions.
Wiring Digital Output
JetNet 6528Gf series provides 1 digital output, also known as Relay Output.
The relay contacts are energized (open) for normal operation and will close for
fault conditions. The fault conditions include power failure, Ethernet port link
break or other pre-defined events which can be configured in JetNet 6528Gf
UI.
Wiring Earth Ground
To ensure the system will not be damaged by noise or any electrical shock, we
suggest you to make exact connection with JetNet 6528Gf with Earth Ground.
For AC input, the 3 pin include V+, V- and GND. The GND pin must be
connected to the earth ground.
For DC input, loosen the earth ground screw by screw drive; then tighten the
screw after earth ground wire is connected.
Model Name
Back-Panel Components
JetNet 6528Gf-AC
1 AC power Inputs and 1 Relay Output.
JetNet 6528Gf-2AC
2 AC power Inputs and 1 Relay Output.
JetNet 6528Gf-AC-DC24 1 AC power inputs, 1 DC power Inputs and 1 Relay Output.
JetNet 6528Gf-2DC24
2 DC power inputs and 1 Relay Output.
