Korenix JetNet 3205G Series, Руководство пользователя

Страница: 12 / 26

9
2-4. Wiring the DC Power Inputs
Follow the steps below to wire JetNet 3205G series redundant DC power
inputs.
[Note] The suitable electric wire ranges from 12 to 23 AWG.
1. Insert the positive and negative wires into the V+ and V- contacts respectively
of the terminal block connector
2. Tighten the wire-clamp screws to prevent the DC wires from being loosened.
3. The Power 1 and Power 2 support power redundancy and polarity reverse
protection functions.