Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1183/1246
9.6.7
Managing Router Discovery
9.6.7.1
Configuring Router Discovery
Selection Criteria
Interface
- Select the router interface for which data is to be configured.
Configurable Data
Advertise Mode
- Select enable or disable from the pulldown menu. If you select enable, Router
Advertisements will be transmitted from the selected interface.
Advertise Address
- Enter the IP Address to be used to advertise the router.
Maximum Advertise Interval (secs)
- Enter the maximum time (in seconds) allowed between
router advertisements sent from the interface.
Minimum Advertise Interval (secs)
- Enter the minimum time (in seconds) allowed between
router advertisements sent from the interface.
Advertise Lifetime (secs)
- Enter the value (in seconds) to be used as the lifetime field in
router advertisements sent from the interface. This is the maximum length of time that the
advertised addresses are to be considered as valid router addresses by hosts.
Preference Level
- Specify the preference level of the router as a default router relative to other
routers on the same subnet. Higher numbered addresses are preferred. You must enter an
integer.
Command Buttons
Submit
- Send the updated configuration to the switch. Configuration changes take effect
immediately. The changes will not be retained across a power cycle unless a save is
performed.
