9
Id.-Nr.: 1556.212.1-07
Safety notes
2.4
Safety instructions for projecting
CAUTION!
•
The instructions contained in the further delivered must be precisely
followed in all circumstances. Failure to do so could result in the cre-
ation of potential sources of danger or the disabling of protective cir-
cuits integrated in the MotionOne 3 system.
•
Apart from the safety instructions given in these manuals, safety pre-
cautions and accident prevention measures appropriate to the situation
in question must also be observed.
•
Measures must be taken to ensure that in the event of power dips or
power failures, an interrupted program can be properly restarted. In
such situations, dangerous operating conditions must not be allowed to
occur even temporarily.
•
In all situations where faults occurring on the automation system could
cause personal injury or significant damage to machinery and equip-
ment, additional external safety measures must be taken in order to
ensure the system as a whole remains in a safe operating condition
even in the event of a fault.
