12V Solar Trickle Charger
40233
WAYS TO INSTALL
1. DC MALE POWER ADAPTER PLUG
Using the included DC Male Power adapter plug connect J-plug to panel J-plug. Then plug
Male adapter into your vessel’s 12V power socket.
Confirm that both connections are tight and secure. Confirm that the lighter socket is active
when vessel is off, otherwise us battery clamp connectors.
2. BATTERY CLAMP CONNECTOR
Using the included battery clamps connect J-plug to panel J-plug. Then connect the red,
Positive clamp to the Positive battery terminal. Finally connect the black, Negative clamp to
the negative battery terminal.
Confirm that both connections are tight and secure.
WARNINGS
1. Observe manufacturer’s safety procedures when working around batteries and other elec-
trical equipment.
2. Product is designed to be used on 12V . Configurations in parallel ONLY Positive (+) to
Positive (+), Negative (-) to Negative(-). Ensure that the positive matches the positive and
the negative matches the negative. Wrong connections may cause damage to part of all of
the system.
3. Products should be placed in a well ventilated area. Free from flammable gases.
4. Make sure panel secured while vehicle is in motion to prevent physical damage or harm to
personal property.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
