Kontron SBC-845D-VEA, Руководство пользователя

Страница: 74 / 131

Overview 4-3 SBC-845D-VEA Single Board Computer User’s Guide
BI
OS
S
etup
ä
ä ä
ä
Overview
SBC-845D-VEA is equipped with the AWARD BIOS stored in Flash ROM. This BIOS has a built-in
Setup program that allows users to easily modify the basic system configuration. This type of
information is stored in CMOS RAM so that it is retained during power-off periods. When the
system is turned on, the SBC-845D-VEA communicates with peripheral devices and check its
hardware resources against the configuration information stored in the CMOS memory. If any
error is detected, or the CMOS parameters need to be initially defined, the diagnostic program
will prompt the user to enter the SETUP program. Some errors are significant enough to abort the
start-up.
ä
ä ä
ä
Entering Setup
1) Turn on or reboot the computer. When the message “Hit <DEL> if you want to run
SETUP” appears, press the <Del> key immediately to enter the BIOS setup program.
2) If the message disappears before you respond, but you still wish to enter Setup, please
restart the system again by turning it OFF and then ON, or touch the "RESET" button
(“COLD START”). You may also restart from a “WARM START” by pressing the <Ctrl>,
<Alt>, and <Delete> keys simultaneously. If you do not press the keys at the right time
and the system will not boot, an error message will be displayed and you will again be
asked to:
t Press <F1> to Run SETUP or Resume
t In HIFLEX BIOS setup, you can use the keyboard to choose among options or
modify the system parameters to match the options with your system. The table
below will show you all of keystroke functions in BIOS setup.