Kontron RMX-1U15L, Руководство пользователя, Страница: 37 / 73

Setting up the Monitor 1-13 RMX-1U15L and RMX-9U15L User’s Guide
M
oni
to
r S
etup
ä
ä ä
ä
RMX-9U15L Rack Mounting
To mount an RMX-9U15L(/RT) monitor, you will need a flat head screwdriver and the help of
another person. One person will hold the monitor in front of the rack while the other person
secures it to the front of the rack with screws.
To mount an RMX-9U15L(/RT) in a rack, follow these steps:
1) Obtain a flat head screwdriver.
2) Determine the mounting location. Then mark the rack mounting holes in front ofthe
rack.
3) Hold the RMX-9U15L(/RT) firmly with the handles towards you. Position the monitor in
front of the rack, aligning the monitor screw holes with the marked rack mounting
holes. Be careful of cabling at all times.
4) Install a 10-32 screw into the top right and left bottom rack mounting holes with a flat
head screwdriver.
Figure 1-10. Mounting RMX-9U15L(/RT) Monitor to Rack
5) Loosely install the remaining six screws. Then tighten down all screws once positioning
has been confirmed.