Kontron PCI-953, Руководство пользователя

Страница: 43 / 158

Jumpers 2-5 PCI-953 Single Board Computer User’s Guide
Hardware
Settings
³
Clear CMOS Operation
The following table indicates how to enable/disable the CMOS Clear Function hardware circuit by
inserting a jumper at the proper position.
To Clear CMOS and then reload the BIOS default settings, follow these steps:
1) Disconnect all power to the system.
2) Move the jumper at JP1 from pins 1-2 to pins 2-3 and leave installed for several seconds
(Clear CMOS Contents).
3) With system power turned off, move the jumper at JP1 from pins 2-3 back to pins 1-2
(Normal Operation).
4) Reconnect the system power and turn on the system. The message “CMOS settings
wrong” and “ CMOS date/time not set” will be displayed and the system will hold up.
Follow the displayed messages to reload the BIOS default settings.
JP1 Description
1-2 Normal Operation
2-3 Clear CMOS Contents