manualshive.com logo in svg

Kontron MOPS/386A, Руководство пользователя

Поделиться
Скачать
Kontron MOPS/386A Скачать руководство пользователя страница 72

Kontron

 BIOS Operation

66

MOPS/386A User’s Guide

21.10 

Updating or Restoring BIOS

If your MOPS/386A board requires a newer BIOS version or the BIOS is damaged, you may

need to update or restore the BIOS.

Phoenix PHLASH allows you to update or restore the BIOS with a newer version or restore a

corrupt BIOS by using a floppy disk without having to install a new ROM chip.

1)

 

Download Phoenix Phlash as a compressed file, CRD1P389.ZIP, from the

Kontron Web site. It contains the following files:

File

Purpose

MAKEBOOT.EXE

Creates the custom boot sector on the Crisis Recovery

Diskette.

CRISBOOT.BIN

Serves as the Crisis Recovery boot sector code.

MINIDOS.SYS

Allows the system to boot in Crisis Recovery Mode.

PHLASH.EXE

Programs the Flash ROM.

WINCRISIS.EXE

Creates the Crisis Recovery Diskette from Windows.

WINCRISIS.HLP

Serves as the help file of WINCRISES.EXE.

PLATFORM.BIN

Performs platform-dependent functions.

BIOS.ROM

Serves as the actual BIOS image to be programmed

into Flash ROM.

2)

 

To install Phoenix Phlash on a hard disk, unzip the content of CRD1P389.ZIP

into a local directory such as C:\PHLASH.

3)

 

To create a Crisis Recovery Diskette, insert a blank diskette into Drive A: or B:
and execute WINCRISIS.EXE. This copies four files onto the Crisis Recovery

Diskette.

File

Purpose

MINIDOS.SYS

Allows the system to boot in Crisis Recovery Mode.

PHLASH.EXE

Programs the Flash ROM.

PLATFORM.BIN

Performs platform-dependent functions.

BIOS.ROM

Serves as the BIOS image to be programmed into Flash

ROM.

4)

 

If the BIOS image (BIOS.ROM) changes because of an update or bug fix, copy
the new BIOS.ROM image onto the diskette.

5)

 

Phlash can fail if the system uses memory managers. If this occurs, the utility
displays the following message:

Cannot flash when memory managers are present.

If you see this message after you execute Phlash, disable the memory manager.

Содержание MOPS/386A




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды