Kontron mITX-HSW-S, Руководство пользователя

Страница: 65 / 95

mITX-HSW-S - User Guide, Rev. 1.1
www.kontron.com // 65
Jumper 1 Position
Description
Pin 1-3 Pin 3-5
X - Backlight Enable Voltage = +3.3V
- X Backlight Enable Voltage = +5V
Jumper 2 Position
Description
Pin 2-4 Pin 4-6
X - Active High
- X Active Low
“X” = Jumper set (short) and “-” = jumper not set (open)
7.15.5. PCIE Configuration Setting for PEG1 (JP8)
Figure 38: PCIE Configuration Setting JP8
Table 55: Pin Assignment JP8
Jumper 1 Position Jumper 2 Position Description
Pin 1-3 Pin 3-5 Pin 2-4 Pin 4-6
X
- X - x16
X
- - X x8 x8
-
X X - x8 x4
- X - X x8 x4 x4
“X” = Jumper set (short) and “-” = jumper not set (open)
7.15.6. ME F/W Selection (JP9)
Figure 39: ME F/W Selection JP9
Table 56: Pin Assignment JP9
Jumper Position
Description
Pin 1-2
X Security Measures Defined by BIOS are Over-written
- Security Measures Defined are Set
2 1
6 5