MITX-CFL0 Series - User Guide, Rev. 1.1
// 65
7.19.
Chassis Intrusion Pin Header (CI)
The pin header CI provides a chassis detection feature that detects whether the chassis cover has been removed. This
function requires a chassis with chassis intrusion detection design.
Figure 35: Chassis Intrusion Pin Header CI
Table 41: Pin Assignment CI
Pin
Signal
Description
Note
1
Signal
Chassis intrusion signal
2
GND
Ground
7.20.
Status LEDs (STB & BOOT)
If the standby status LED STB is on, that means the system is in standby mode; if the boot status LED BOOT is on, that
means the system is powered on.
Figure 36: Status LEDs STB, BOOT
1
2
