Kontron Microspace Series, Руководство пользователя

Страница: 35 / 63

www.kontron.com
33
MPC20/20L/21/21C MPC20WOL/21WOL / Prepare the Computer System
7.3 Connect the Peripherals to the System
Prepare the following peripherals:
»
VGA monitor (LCD or CRT) with a resolution up to 1024x768 pixel
»
PS/2 keyboard
»
USB mouse
»
LAN cable, if available
»
USB CD drive or floppy drive
»
Power supply with 12Volts and minimum 30Watts
1. Connect the VGA monitor to the 15pin high density Subconnector.
2. Connect the keyboard to the PS/2 connector.
3. Connect the USB mouse to one of the USB connectors.
4. Connect a USB CD-drive or a USB floppy drive to one of the USB connectors.
5. Connect the 12Volt power supply to the power input of the system.
Danger: The polarity must be correct or the electronic board may be destroyed.
Insert a boot device: USB stick, floppy or bootable CompactFlash or use a PXE/RPL server to boot from LAN A ( in earlier
versions LAN 0).
Photo of MPC20 Version 1.0
Photo of MPC21 Version 1.0