manualshive.com logo in svg

Kontron KFM19_e, Руководство пользователя

Поделиться
Скачать
Kontron KFM19_e Скачать руководство пользователя страница 12

 Product 

Description 

Front Panel 

The front plate of the KFM19_e is available alternatively as 19" front plate or in 

panelmount version.  

The 19" front plate version is suitable for the installation of the monitor in  

19" industrial cabinets. Therefore are available four mounting holes. 

The panelmount version is suitable for the installation of the monitor in an 

instrument panel or other cabinets. Therefore at the rear side of the front plate are 

available eight threaded studs. 

Depending on the ordered KFM19_e configuration at the front side are located the 

control elements of the on screen displays (OSD), the “On/Off” button with the 

“Status LED” (refer to the “Controls and LED Indicator” section), the 19" front 

plate and the 19" display with the protection pane or touchscreen (optional).  

The protection class IP 65 is ensured at the front side of the monitor.  

19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 

11 

 

 

 

2 

1 

3 

Fig. 2: KFM19_e – Front side (shown as panelmount front plate version) 

1

 

Front panel 

2

 

19” display with protection plate or 

touchscreen (optional) 

3

 

Controls and LED Indicator 

Содержание KFM19_e












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды