KBox A-103 – User Guide, Rev. 3.0
// 86
12.5.
Firmware Update
Firmware updates are typically delivered as a ZIP archive containing only the firmware images. The content of the
archive with the directory structure must be copied onto a data storage device with FAT partition.
12.5.1.
Updating Procedure
BIOS can be updated with the Intel tool fpt64.efi using the procedure below:
1.
Copy these files to an USB stick.
flash.nsh (if available)
fpt64.efi
fparts.txt
SMVVR<xxx>……bin (where xxx stands for the version #)
2.
Start the system into the uEFI shell (see chapter 12.3.1.1 “Entering the uEFI Shell”).
3.
Change to the drive representing the USB stick.
fsx: (x = 0,1,2,etc. represents the USB stick)
Change to the directory where you copied the flash tool.
cd <your_directory>
4.
Start flash.nsh (if available)
OR type
fpt64 –F SMVVR<xxx>......bin
5.
Wait until flashing is successful and then power cycle the board.
Do not switch off the power during the flash process!
