KBox A-103 – User Guide, Rev. 3.0
// 85
12.4.
uEFI Shell Scripting
12.4.1.
Startup Scripting
If the ESC key is not pressed and the timeout has run out then the uEFI Shell tries to execute some startup scripts
automatically. It searches for scripts and executes them in the following order:
1.
Initially searches for Kontron flash-stored startup script.
2.
If there is no Kontron flash-stored startup script present then the uEFI-specified
startup.nsh
script is used. This
script must be located on the root of any of the attached FAT formatted disk drive.
3.
If none of the startup scripts are present or the startup script terminates then the default boot order is
continued.
12.4.2.
Create a Startup Script
Startup scripts can be created using the uEFI Shell built-in editor edit or under any OS with a plain text editor of your
choice. To create a startup shell script, simply save the script on the root of any FAT-formatted drive attached to the
system.
12.4.3.
Examples of Startup Scripts
12.4.3.1.
Execute Shell Script on other Harddrive
This example (s
tartup.nsh
) executes the shell script named
bootme.nsh
located in the root of the first detected disc
drive (
fs0
).
fs0:
bootme.nsh
