www.kontron.com
CP6940 User Guide
// 29
3.4
Board Interfaces
3.4.1
Front Panel Elements
3.4.1.1
CP6940-RA-OC-P
At the CP6940-RA-OC-P faceplate are two QSFP+ cages, four SFP+ ports, two SFP cages, the front RS232 and the man-
agement port accessible. Also are there the status LEDs for the front interfaces, the hot swap LED the LED1 and the LED2
visible. To activate or deactivate the board there are the Handle switch and the Reset switch mounted.
Figure 3:
Front Panel of the CP6940-RA-OC-P
3.4.1.2
CP6940-RA-OC
At the CP6940-RA-OC faceplate are four SFP+ ports, the four front RJ45 ports, the front RS232 and the management port
accessible. Also are there the status LEDs for the 24 GBE ports, the hot swap LED the LED1 and the LED2 visible. To acti-
vate or deactivate the board there are the Handle switch and the Reset switch mounted.
Figure 4:
Front Panel of the CP6940-RA-OC
3.4.1.3
-SA-OC-V
At the CP6940-SA-OC-V faceplate are the two SFP+ cages, two SFP cages, the four front RJ45 ports, the front RS232 and
the management port accessible. Also are there the status LEDs for the 28 GBE ports, the hot swap LED the LED1 and the
LED2 visible. To activate or deactivate the board there are the Handle switch and the Reset switch mounted.
Figure 5:
Font Panel of the CP6940-SA-OC-V
