Kontron CP6004-RA, Руководство пользователя

Страница: 22 / 78

Main Setup CP6004-SA/-RA/-RC/CP6004X-SA
Page 16 ID 1053-6161, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
2.6 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the uEFI console.
2.6.1 COM0
On the CP6004-SA/-RA/CP6004X-SA, the COM0 port (serial port 0) corresponds to the RS-
232 serial port on the front panel (hardware designation COMA) and is switchable to rear I/O.
On the CP6004-RC, the COM0 port (serial port 0) corresponds to the RS-232 serial port on the
rear I/O (hardware designation COMA).
2.6.1.1 Console Redirection
Default setting: Enabled
2.6.1.2 Console Redirection Settings
For information about this function, refer to Chapter 2.6.2.2 in this manual.
A p t i o S e t u p U t i l i t y - C o p y r i g h t ( C ) 2 0 11 A m e r i c a n M e g a t r e n d s , I n c .
M a i n B o o t S e c u r i t y S a v e & E x i t
COM0
Console Redirection [Enabled]

Console Redirection Settings
COM1
Console Redirection [Disabled]

Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
Console Redirection Settings

: Select Screen

: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save & Exit
ESC: Exit
Ve r s i o n 2 . 1 4 . 1 2 1 9 . C o p y r i g h t ( C ) 2 0 11 A m e r i c a n M e g a t r e n d s , I n c .
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for COMA (RS-232).
Enabled Use this setting to enable console redirection for COMA (RS-232).