Kontron CP3005-SA, Руководство пользователя

Страница: 64 / 102

CP3005-SA – Rev. 0.6 Preliminary
www.kontron.com // 64
The following table provides pinout information for the onboard serial port connectors J2 and J3. Refer to the module
layout for connector and pin locations.
Table 38: Serial Port Connectors J2 (COMB) and J3 (COMA) Pinout
Pin Signal Description I/O
1 DCD Data carrier detect I
2 DSR Data send request I
3 RXD Receive data I
4 RTS Request to send O
5 TXD Transmit data O
6 CTS Clear to send I
7 DTR Data terminal ready O
8 RI Ring indicator I
9 GND Signal ground --
10 NC Not connected --
9.5.5. Peripheral Control Interface
A power supply with power management can be connected to the CP-RIO3-04 rear transition module via the
peripheral control connector J13.
The following table provides pinout information for the peripheral control connector J13. Refer to the module layout
for connector and pin locations.
Table 39: Peripheral Control Connector J13 Pinout
Pin Signal Description I/O
1 GND Signal ground --
2 PWR_5VSTDBY +5V standby power (optional) I
3 RSV Reserved --
4 VCC5V Power +5V O
5 RSV Reserved --
6 VCC3V3 Power +3.3V O
7 PWR_SLPS3# Power supply sleep mode O
8 GND Signal ground --
9 PWR_BTN# Wake-up / sleep input I
10 GND Signal ground --
9.5.6. SATA Interfaces
The onboard SATA connectors J5 and J6 allow the connection of standard HDDs/SSDs and other SATA devices to the
CP-RIO3-04 rear transition module.