
26
www.kontron.com
User Guide
COMe Ref. Carrier-i T10 TNI
2.3.14 Power Supply and Management
The COMe Ref. Carrier-i T10 TNI supports fixed input voltage (12V only) as a standard feature via the DC
jack, J21.
Note:
The COMe Ref. Carrier-i T10 TNIP (Professional) version also supports a wide input voltage
range (6.5V - 30V) by default via a wired power connector, J19. The COMe Ref. Carrier-i T10
TNIP can be powered up either through the J19 or the J21 connector.
Warning:
Powering up the COMe Ref. Carrier-i T10 TNIP through power both connectors (J19 and
J21) at the same time may result in damage to the power supply unit/power adapter.
The following 12V power supply is recommended for use with the COMe Ref. Carrier-i T10 TNI:
»
SDI65-12-U-P11
The following figure and table provide pinout information for the wired power connector, J19.
Note:
Smart battery support is only available on the COMe Ref. Carrier-i T10 TNIP (Professional)
version via the smart battery connector, J3.
The following figure and table provide pinout information for the smart battery connector, J3.
2.3.15 RTC
The COMe Ref. Carrier-i T10 TNI provides a 2-pin connector, J14, for an external CMOS battery. In ad-
dition, the COMe Ref. Carrier-i T10 TNIV (Value) and the COMe Ref. Carrier-i T10 TNIP (Professional) ver-
sions provide a 1.5F goldcap, C181, for RTC backup.
Figure 14: Power Connector J19
1
2
J19
Table 16: Power Connector J19 Pinout
PIN
SIGNAL
1
V_IN
2
GND
Figure 15: Smart Battery Connector J3
1
5
J3
Table 17: Smart Battery Connector J3 Pinout
PIN
SIGNAL
1
GND
2
THERM
3
SMB_DAT
4
SMB_CLK
5
V_BATT