3. Important Instructions
M@CII 70/104/121/150 - User’s Manual (V1.00)
5
3.
Important Instructions
This chapter contains instructions which must be observed when using your Micro Client II (M@C II 70/104/121/150)
system. The manufacturer’s instructions provide useful information on your device.
3.1.
Note on the Warranty
Due to their limited service life, parts which by their nature are subject to a particularly high degree of wear (wearing
parts) are excluded from the warranty beyond that provided by law. This applies to batteries, to the display backlighting,
for example.
3.2.
Exclusion of Accident Liability Obligation
Kontron Embedded Computers shall be exempted from the statutory accident liability obligation if the user fails to
observe the safety instructions.
3.3.
Liability Limitation / Exemption from the Warranty Obligation
In the event of damage to the device caused by failure to observe the hints in this manual and on the device (especially
the safety instructions), Kontron Embedded Computers shall not be required to honor the warranty even during the
warranty period and shall be exempted from the statutory accident liability obligation.
