Kontron 18030-0000-11-1, Руководство пользователя

Страница: 45 / 88

ETX®-CD / ETX® Connectors
6.4.2 Connector X2 Signal Description
ISA Bus
The implementation of this subsystem complies with the ETX® Specification. Implementation information is provided in
the ETX® Design Guide. Refer to the documentation for additional information.
Restrictions:
Memory Transfer: According to the used LPC 2 ISA solution only memory transfer in the Firmware HUB memory range and
with Firmware HUB commands is possible. The Firmware HUB range is from FED4:0000 to FED4:0FFF
I/O Transfer: Only two generic decoding ranges are available which can be selected in the BIOS setup with a maximum size
of 256 Byte. This works of course only, when there are no other devices connected to that I/O ports in that range. It can
be that there is only one decoding range available, when there are the COM and/or parallel ports of an external SuperI/O
controller used.
Signal level: The signal level of the used Fintec controller is 3,3V, 5V tolerant. To achieve the 5V level, most of the signals
are pulled up to 5V.
6.5 Connector X3 (VGA, LCD, Video, COM1 and COM2, LPT/Floppy,
Mouse, Keyboard)
Flat-Panel Interfaces
ETX®-CD modules can implement an LVDS flat-panel interface called JUMPtec Intelligent LVDS Interface (JILI). These
modules do not implement a parallel digital flat-panel interface called JUMPtec Intelligent Digital Interface (JIDI).
LVDS Interface Pinout (JILI)
Pin Signal Pin Signal
1 GND 2 GND
3 R 4 B
5 HSY 6 G
7 VSY 8 DDCK
9 DETECT# 2) 10 DDDA
11 LCDDO16 12 LCDDO18
13 LCDDO17 14 LCDDO19
15 GND 16 GND
17 LCDDO13 18 LCDDO15
19 LCDDO12 20 LCDDO14
21 GND 22 GND
23 LCDDO8 24 LCDDO11
25 LCDDO9 26 LCDDO10
27 GND 28 GND
29 LCDDO4 30 LCDDO7
31 LCDDO5 32 LCDDO6
33 GND 34 GND
35 LCDDO1 36 LCDDO3
37 LCDDO0 38 LCDDO2
39 VCC 1) 40 VCC 1)
41 JILI_DAT 42 LTGIO0 2)
43 JILI_CLK 44 BLON#
45 BIASON 2) 46 DIGON
47 COMP 2) 48 Y 2)
49 SYNC 2) 50 C 2)
1) To protect external power lines of peripheral devices, make sure that:
- the wires have the right diameter to withstand the maximum available current
45