Kontron Embedded Computers PCI - 960 Скачать руководство пользователя страница 81

Страница: 81 / 86

11. AMI BIOS Configuration

PCI-960 – User’s Manual (V1.02)

11.7.2.

South Bridge Chipset Configuration

You can use this field to select options for the SouthBridge chipset configuration.

11.7.2.1.

USB Function

This option allows you to enable or disable the host controllers.

Possible settings are: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports and

8 USB Ports

11.7.2.2.

USB 2.0 Controller

This option allows you to enable or disable the EHCI USB controller function.

Possible settings are:

Enabled

and Disabled.

If this option “

USB 2.0 Controller

” is set to “Disabled”, the option “

USB 2.0 Controller Mode

” (Advanced/USB

Configuration) is not available.

11.7.2.3.

Audio Controller

This option allows you to enable or disable the onboard audio.

The available settings are:

AC’97 Audio and Modem

, AC’97 Audio only,

AC’97 Modem only

and Disabled.

If a MiniPCI Modem is used please contact our Support Department!

11.7.2.4.

SMBUS Controller

This option allows you to enable or to disable the SMBUS controller.

Possible settings are:

Enabled

and Disabled.

Содержание PCI - 960























































































Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды

Kontron Embedded Computers PCI - 960, Руководство пользователя

Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды