Kontron Embedded Computers PCI - 960 Скачать руководство пользователя страница 6

Страница: 6 / 86

2. Introduction

PCI-960 – User’s Manual (V1.02)

2.1.

Symbols used in this Manual

Symbol Meaning

This symbol indicates the danger of injury to the user or the risk of damage to the product if the

corresponding warning notices are not observed.

This symbol indicates that the product or parts thereof may be damaged if the corresponding warning

notices are not observed.

This symbol refers to general information on the device and manual.

This symbol comes before useful information and tips for routine operation.

format a:

Commands are printed in

Courier

Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of the Microsoft Corporation.

IBM, PC-AT, OS/2 and PS/2 are registered trademarks of the International Business Machines Corporation.

Intel and Pentium are registered trademarks of Intel Corporation.

AMI is a registered trademark of American Megatrends, Inc.

Other product names cited in this manual may also be trademarks and are used here solely for identification purposes.

Содержание PCI - 960























































































Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды

Kontron Embedded Computers PCI - 960, Руководство пользователя

Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды