Konsberg AIS 200, Руководство по установке

Страница: 71 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix B - Digital interface IEC 61162-1
10.2.3 IMO number
To request the current IMO number from the AIS Mobile Unit, use the command:
$PSTXQ,IMO*<FCS><CR><LF>
The AIS Mobile Unit response message has the format:
$PSTXR,IMO,<nnnn>*<FCS><CR><LF>
To set or change the IMO number, use the command:
$PSTXS,IMO,<nnnn>*<FCS><CR><LF>
Field Description Range
IMO Message ID identifying this sentence NA
<nnnn> IMO number 0 to 1073741823
All fields are required and used.
10.2.4 Serial port communication parameters
To request the current communication parameters of the serial ports, and to retrieve all
available serial ports, use the command:
$PSTXQ,PORT*<FCS><CR><LF>
The AIS Mobile Unit response message has the format (one message per port):
$PSTXR,PORT,CCCC,<bbbb>,<p>,<d>,<s>*<FCS><CR><LF>
To set or change the communication parameters, use the command:
$PSTXS,PORT,CCCC,<bbbb>,<p>,<d>,<s>*<FCS><CR><LF>
Field Description Range
PORT Message ID identifying this sentence NA
CCCC Name of serial port COM1 to COM32
<bbbb> Baud rate 1200 to 38400
<p> Parity, 'N' = None, 'E' = Even, 'O' =
Odd
'N', 'E', 'O'
<d> Data bits 5-8
<s> Stop bits 1, 2
All fields are required and used.
61