manualshive.com logo in svg

Konsberg AIS 200, Руководство по установке

Поделиться
Скачать
Konsberg AIS 200 Скачать руководство пользователя страница 57

Kongsberg AIS 200 Installation Manual, rev. 2 

 

Maintenance 

6.4

 

Software updates 

There are two ways to upgrade the software in the AIS 200 system. Either manually (method 
1) or by using FTP (method 2). Select one of the two methods: 
 
 

6.4.1

 

Manual update 

The software in the AIS 200 system can be upgraded to the latest version in the field by 
changing the compact flash inside the Mobile Unit. Do the following: 

1.

 

Enter the 

System 

menu, select 

Software upgrade 

and 

Start upgrade

. Follow on-

screen instructions. Power off the unit. 

2.

 

Open the front panel. 

3.

 

Locate the compact flash and gently remove it. 

4.

 

Insert new compact flash and close front panel. 

5.

 

Power on the unit. 

 
 

6.4.2

 

Update using FTP 

The software in the AIS 200 system can be upgraded to the latest version in the field by 
connectiong an external PC to the AIS 200 LAN connector. A software upgrade has to be 
performed by Kongsberg Seatex AS service personnel or representatives. 
 

47 

Содержание AIS 200
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды