Konig CMP-PCIE2USB3, Руководство пользователя

Страница: 2 / 57

2
ENGLISH
Introduction
• Features
• System requirements
• Installing the hardware device
• Installing the software driver
• Connections
• Performance
• Package contents
• Disclaimer
Introduction:
The new USB 3.0 standard is 10 times faster then USB 2.0. This PCI express card enables you to use this speed to
the fullest. It’s backwards compatible with USB 2.0 (480 Mbps) and USB 1.1 (1.5 Mbps) so you can still use your old
hardware. Move large files quickly from and to external storage devices such as HDDs, digital cameras and other USB
devices.
Features:
• 2x Super-Speed USB3.0 (5Gbps) connections.
• NEC UPD720200 chipset.
• Compliant with PCI Express Base Specifications 2.0.
• Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 0.95.
• Backwards compatible with USB2.0 High-Speed (480Mbps), USB1.1 Low-Speed (1.5Mbps).
• Bus interface: PCI-Express.
• 4-pin power connection for power supply from system.
• Supports Plug-n-Play and hot-swapping function.
• Each USB port supplies m5V / 900mA power output to USB device.
• Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
• Compatible with Windows XP/Vista/7 (32-bit and 64-bit).
System Requirements:
• AMD or Intel Pentium 1.5GHz or better based computer
• Windows
®
XP / Vista or 7 operating system
• 1 GB DDR Ram or above.
• Free PCI-Express slot with x1, x4, x8 or x16.
• CD/DVD-Rom drive
Installing the hardware device:
• Turn your computer off, remove the power connection and the cover from the computer case.
• Remove the metal cover plate on the rear of a PCI-Express card slot.
• Insert the card into the PCI-Express slot and fix it on the brackets side.
• Connect the internal power on the 4-pin of the PCI-Expres USB3.0 card.
• Place back the cover of the computer case and turn on the computer.