König CMP-USBCARD2HS, Руководство пользователя

Страница: 2 / 15

ENGLISH
USB 2.0 PCI-CARD 4+1 PORTS
Installation
• Before installing turn off your computer
• Unplug the power cord and open the computer
• Remove the slot bracket at the back of the computer
• To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard
of your computer
• Replace the slot brackets holding screw to secure card (if available)
• When installation is finished close the computer again
Driver Installation
• The driver will be installed automatically when the computer starts up in Windows® XP or later
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
2