KONICS KRN1000 SERIES Скачать руководство пользователя страница 63

Страница: 63 / 86

Menu

© Copyright Reserved KONICS Co., Ltd.

7.4.3

RS422/485

It sets about RS422/485 communication. Communication setting is available only at KRN1000

parameter. You can only check the items and by communication but cannot change the set.
RS422/485 communication makes set or monitor parameters at extenral upper system (PC or

graphic panel, etc.) and uses transfer data.
It is recommended to use our dedicated software program DAQMaster for monitoring. If you

want to develop monitoring program not using our DAQMaster program or to use the related

Modbus program, please refer to user manual for communication.

Visit our homepage (www.konics.com) to download DAQMaster program, and user manual for

communication.

No Item

Descriptions

Comm. Address

Set communication address.

The set communication address is applied to RS422/485, Ethernet, USB

device communication. Duplicated communication address setting is not

available at the same communication line.

Buad Rate

Set communication speed, baud rate.

Setting range: 2400, 4800, 9600, 19200, 38400 (unit: bps)

Parity Bit

Set communication parity bit.

- Setting range: None, Odd, Even

Stop Bit

Set communication stop bit.

- Setting range: 1, 2 (unit: bit)

Response Wait

Time

To prevent possible error due to communicating with low speed Master

(PC, PLC, etc), set communication response wait time.

If setting too short communication response wait time, communication

error may occur in Master.

- Setting range: 5 to 99 (unit: ms)

Protocol

Set communication protocol. It supports only RTU.

Comm. Write

Set enable/disable writing parameter setting values of KRN1000 via

RS422/485 communication. Reading parameter setting value is available

regardless of communication write enable/disable setting.

RS422/485 Port

Set using/not using RS422/485 communication.

Over two communications among RS422/485, Ethernet, USB Device communication are not

activated at the same time. Set one communication and the others are automatically not

activated.

Содержание KRN1000 SERIES























































































Результаты поиска

Содержание KRN1000 SERIES

Отзывы:

Похожие инструкции для KRN1000 SERIES

Бренды по названию

Популярные бренды

KONICS KRN1000 SERIES, Руководство пользователя

Результаты поиска

Содержание KRN1000 SERIES

Отзывы:

Похожие инструкции для KRN1000 SERIES

Бренды по названию

Популярные бренды