KONICS KRN1000 SERIES, Руководство пользователя

Страница: 53 / 86

7
Menu
© Copyright Reserved KONICS Co., Ltd. 53
7.3.2 Input Option
No Item Descriptions
1 Channel
Moves channel. Touch ‘CH1’ or
to change the channel.
2
Special
Func.
※
1
Displays the applied measurement value as the set special function.
Depending on input type, applicable special functions are different.
Setting range
- Temperature sensor input: None, Difference (deviation)
- Analog input: Linear, Root, Square, Two Unit
Two Unit is activated only for 4-20mA (shunt) input type.
3 Ref CH
4 Two Unit
5 Input Bias
Corrects error from input (thermocouple, RTD, voltage, current (shunt)), not
from the recorder.
Setting range: -9999 to 9999, -999.9 to 999.9, -99.99 to 99.99, -9.999 to 9.999
-0.9999 to 0.9999
(depending on the set decimal point, the range is different.)
6
Span
※
2
Adjusts high-limit error by regulating display value which is about
measurement value or applied scale.
7
Record
Method
Set the recording method of measured data by each channel.
Setting
value
Descriptions
Instant Saves measurement value at every recording cycle.
Average
Saves the average value of sampling measurement value
during recording cycle.
Min
Saves the min. value of sampling measurement value during
recording cycle.
Max
Saves the max. value of sampling measurement value during
recording cycle.
8 Digital Filter
In some applications the fluctuating measured input causes the display value
to fluctuate. In this case accurate display/record is disable. This function is
able to make display value stable by input digital filter. Input digital filter uses
moving average method. It does not affet to display period but display value
may be different with input value.
9
No. of
Digital
Filters
※
3
Set the number of samplings which apply to digital filter. Set Filter type and this
menu is activated.
Setting range: 1 to 128