Konica Minolta T-10A, Инструкция по эксплуатации

Страница: 42 / 60

40
hole
4
Connect both adapters with the extension cable.
5
Set the power switch to “I” (ON) and push out the hold button
(RUN).
‹
Measurement will start.
z
If the receptor head is connected to the main body through the extension cable and measurement is
performed, consumption current will increase by approximately twice.
Fixing the Receptor Head
The receptor head can be fixed in the measuring location (e.g. on a panel) by the following
methods. (For the reference measurement plane, refer to page 51.)
j
By using the tripod fixing screw hole on the back of the receptor head
k
By using the holes on the receptor head adapter (T-A21)
Dimensions
An example of affixing the head to a panel