Konica Minolta T-10A, Инструкция по эксплуатации

Страница: 31 / 60

29
CCF Setting Method
The CCF can be set in the following two ways.
Once the CCF is set, it will remain effective even if the power is turned OFF or the batteries are changed.
j
Entering the CCF directly
This method can be used if the CCF is known.
■
Entering the CCF
1
Press the [NORM] key to activate normal mode.
z
The CCF can be set in normal mode only.
2
Push out the hold button (RUN).
3
Open the slide cover and press the [CCF] key.
‹
CCF mode will be activated.
4
Press the [SET] key.
‹
The instrument is now ready for you to enter a value, and
the currently set CCF (default: 1.000) will blink.