Konica Minolta T-10A, Инструкция по эксплуатации

Страница: 10 / 60

8
Preparation
Installing the Receptor Head
1
Attach the receptor head (Mini receptor head in the case of
T-10MA) to the main body.
▼
For T-10MA
Removing the Receptor Head
1
Hold down the receptor head remove button, then pull out
the receptor head (Mini receptor head in the case of T-10MA)
from the main body.
▼ For T-10MA
z
Always set the power switch to the OFF position (the “

”side) before
attaching or removing the receptor head.
Attaching or removing the head while the
power is ON may generate an error.
Selecting measuring units
The Konica Minolta llluminance Meter allows you to take readings
in either Lux (lx.) or Foot-candle (fcd) units.
1
Set the power switch to “ ” (OFF), and pull the battery cover
while pressing it down slightly.
2
Remove two AA-size batteries, if it exits.
3
Set the measuring-unit selector to the desired position
(lx. or fcd).
4
Pull back those batteries and battery cover.
Attaching the Cap
■
For T-10A
When attaching the strap to the main body, attach the
cap to the strap as shown below.
1
Pass the strap through the string extended
from the cap, then attach the strap to the
main body.