10
(GB)
Caution
• As the temperature of a halogen lamp becomes very high, touching it
may cause burns. Do not touch it with bare hands. Turn off the power
and wait for at least 15 minutes to let the lamp cool before you change
it.
• When mounting or replacing the lamp, do not apply excessive force to the
lamp or touch the lamp and reflector.
1
Open the lamp cover located on the top of the unit, and loosen two
screws.
2
Pull up the lamp holder and set it on the panel.
3
Hold the lamp holder and insert the supplied lamp.
4
Set the lamp holder in the original position, tighten two screws and
close the lamp cover.
Replacing the halogen lamp
The life of a halogen lamp is about 1,000 hours. When the supplied lamp
burns out, replace it with a new lamp.
To replace the halogen lamp, hold the lamp holder and remove the burned-
out lamp after step 2.
Mounting the Halogen Lamp
Match the pin with the hole
and insert.
Coin
Lamp holder