Konica Minolta PagePro 1350EN, Руководство пользователя

Страница: 11 / 92

About the Indicator Functions
3
About the Indicator Functions
Indicator Functions
The control panel has two indicators
and one button. The control panel
indicators provide information on the
status of the printer.
1—Ready indicator
2—Error indicator
3—Cancel button
The Cancel button allows you to:
„
Continue a print job after an
error message
„
Print a test page
„
Cancel a print job
Continuing a Print Job after an Error Message
You can continue the print job after correcting the following types of errors:
„
When there is no more paper in the tray
„
When paper of a different format than that set in the printer driver was fed
into the printer
1
Check that one of the above errors has occurred.
2
Perform the remedial action according to the error.
3
Press the Cancel button to operate the media feed.
The print job continues.
For details on the error messages, refer to Chapter 8, “Troubleshooting” on
page 59.
Printing a Test Page
You can print the following four kinds of test pages by pressing the Cancel
button with the printer in idle mode:
„
Operator Panel Status Sheet: Hold the Cancel button down for a second
and then press the Cancel key once.
"
We advise you to print this sheet and keep it close to your printer for
reference.
1
2
3