Konica Minolta MK-734 Скачать руководство пользователя страница 1

E-1

MK-734 

Power Supply BOX

INSTALLATION MANUAL

A4NJ-9550-04

Applied Machines: C658/C558/C458/C368/C308/C258/C554e/C454e/C364e/C284e/C224e/C554/C454/C364/

C284/C224/C287/C227/554e/454e/364e/284e/224e/367/287/227

COLOR MFP: 65 ppm/55 ppm/45 ppm/36 ppm/30 ppm/28 ppm/25 ppm/22 ppm

MFP: 55 ppm/45 ppm/36 ppm/28 ppm/22 ppm

Product Code: A79J/A79K/A79M/A7PU/A7PY/A7R0/A5AY/A5C0/A5C1/A5C2/A5C4/A2XK/A4FJ/A161/A4FK/A4FM/

A797/A798/A61D/A61E/A61F/A61G/A61H/A789/A7AH/A7AK

1. Accessory parts

*1

Use the power cord appropriate for the region 
where the machine is used.

*2

Depending on the marketing area, this power 
cord may not be included.

*3

This part is not used in this installation.

Note:

    • This manual provides the illustrations of the 

accessory parts and machine that may be 
slightly different in shape from yours. In that 
case, instead of the illustrations, use the 
appearance of your machine to follow the 
installation procedure. This does not cause any 
significant change or problem with the proce-
dure.

    • If none of the later steps instruct you to use the 

parts including screw and cover that you 
removed following the instructions described in 
this manual, discard them.

    • To distinguish the supplied power cord A (for 

North America) and power cord B (for Taiwan), 
use the method described below.

Power cord A: The label is attached to the 

cord.

Power cord B: The pins of the plug has the 

cover.

No.

Name

Shape

Q’ty

1. Power supply 

Box

1

2. Power cord A 

(for North 
America) 

*1*2

1

3. Power cord B 

(for Taiwan)  

*1*2

1

4. Power cord C 

(for Europe)  

*1*2

1

5. Power cord D 

(for China) 

 *1*2

1

6. Screw A

(3 x 12 mm)

3

7. Screw B

(4 x 12 mm)

 *3

1

8. Installation 

manual 

1

set

Keep this bag away from babies and 
children. Do not use in cribs, beds, 
carriages, or playpens.

The thin film may cling to nose and 
mouth and prevent breathing. This bag is 
not a toy.

Power cord A

Power cord B

Label

Cover

Содержание MK-734







Отзывы: