Konica Minolta IC-301, Руководство пользователя, Страница: 181 / 212

Setting Parameters in the Job Parameters Window 173
Face up
¾
Select this check box to deliver a job face up.
Face down
¾
Select this check box to deliver a job face down.
Slip Sheets
Slip sheets between copies
1.
Select this check box to print slip sheets with your job.
If you want to collate the job, the slip sheets are printed
between sets. If you want the job uncollated, the slip sheets are
printed between groups.
2.
In the
Tray
list, select the tray in which the specified media type
is loaded.
Layout
Rotate 180
¾
Select this check box to rotate your job by 180°.
Scaling
¾
Select one of the following options:
•
Manual
: Enter the percent by which you want to
proportionally decrease or increase the image size.
•
Fit to ouput sheet size
: For the image to fit the selected paper
sheet size.
Note: When you collate a document, select Face down (Face up) and
From N to 1 (From 1 to N)
in the
Print order
parameter to print the set
in the correct order.
Note: You can also use the Fit to output sheet size option to scale
the layout for imposed jobs.