Konica Minolta IC-203, Руководство пользователя

Страница: 326 / 432

PostScript PPD Printer Driver setting (Mac OS 9) 11
IC-203 11-33
Transparency Interleave
Transparency Interleave cannot be set in the following cases:
- When the [Transparency] is not selected for [Media] in the [Print] - [Printer
Specific Options] dialog box (1)
Paper Tray (Transparency Interleave)
Uses to select the paper tray for Transparency Interleave.
The Paper Tray (Transparency Interleave) cannot be set in the following cas-
es:
- When the [Transparency] is not selected for [Media] in the [Print] - [Printer
Specific Options] dialog box (1).
- When the [Paper Sources] is not selected in the [Configure] dialog
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. You can use this when printing a large volume document, such as
multiple sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
the [Printing] dialog box will appear.
2
Select [Printer Specific Options (2)]
of optional menu.
3
Click [Wait Mode] to display the list. Then select [Wait Mode] or [Proof
and Print].
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
Printed This is set when inserting the printed interleaf for
the transparent sheet.
Blank This is set when inserting the blank interleaf for
the transparent sheet.