Chapter 9 Operational Settings
196
Paper Feeding Operation Setting
[Soft Pick Setting]
When you experience pick errors from the separator roller
slipping on the paper, or paper jams from scanning thin papers
of small widths, the symptom may be improved by bringing
down the pick roller unit and keeping the unit at the lower
position (disabling the Soft Pick Setting).
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, select [Device Setting 2]
J
[Soft Pick Setting].
3
Specify whether to enable or disable the soft pick setting.
Select [Disable] to reduce pick errors and paper jams, by lowering the
pick roller.
Skews and multifeeds may occur when you perform
scanning with the soft pick setting disabled.
Use [Enable] for normal scanning.
This setting can also be configured from the operator
panel.
