Konica Minolta DRYPRO 873, Руководство по эксплуатации

Страница: 119 / 124

1
2
3
4
5
Appendix
7
8
9
1 0
1 1
1 2
119
Test Print Check List
DRYPRO MODEL 873 Test Print Check List
* Enter “OK” or “NG” in the “Judgment” column and density value in “( )”
Date and time of
implementation
Year Month Day ( ) :
Main Unit
Name
Name of a Person
in Charge
Tray Tray 1/Tray 2/Tray 3
Category
Item-
Num-
ber
Item to be Checked
Judgment
*
1st Recheck
Visual check of QC pattern
Image
appearance
(1) “Geometric pattern” is printed
(2) Alphabetic/numeric characters on the film image can be
properly identified
(3)
No “speckle noise” was created on all or part of the film image
(4) No “horizontal stripe” was created on all or part of the
film image
(5)
No “vertical stripe” was created on all or part of the
film image
(6) No “serious image distortion” was created on all or part of
the film image
(7) No “image wear” was created on all or part of the film image
(8) No “image anomaly” other than items in (3) to (7) occurred on
all or part of the film image
Resolution
(9)
The “horizontal thin line” of QC pattern appears to be resolved
(Use of a magnifying glass)
(10) The “vertical thin line” of QC pattern appears to be resolved
(Use of a magnifying glass)
Check from operation panel
Density
(11)
After printing the QC pattern, the calibration icon and mes-
sage are not displayed on the DRYPRO 873 operation panel
(12)
After printing the QC pattern, "NG" is not displayed in "1" to "4" of
the "QC results" in the QC window on the DRYPRO 873 operation
panel, but the correct density value (two to three digits) is displayed
1:( )
2:( )
3:( )
4:( ) 1:( )
2:( )
3:( )
4:( )
Remarks
Total judgment
If the first total judgment shows “NG”, print the QC pattern again after performing calibration and recheck. If the total
judgment is “NG” again on rechecking, contact Konica Minolta technical representatives.