Konica Minolta DiMAGE DiMAGE Z6, Инструкция по эксплуатации

Страница: 38 / 132

Manual exposure mode allows individual selection of shutter speeds and
apertures. This mode overrides the exposure system giving the
photographer total control over the final exposure.
38 A
DVANCED RECORDING
Use the up/down keys of the controller to change
the shutter speed.
MANUAL (M) EXPOSURE MODE
The changes made to the exposure are visible in the live image on the monitor. The
monitor shutter-speed and aperture display turns red when the shutter-release button is
pressed partway down if the image is significantly underexposed or overexposed. If the
monitor is black, increase the exposure until the image is visible; decrease the exposure
if the monitor is white.
In manual exposure mode, the auto camera-sensitivity setting fixes the ISO value at 100.
The camera sensitivity can be changed in section 3 of the recording menu (p. 64). The
flash mode can be set to fill-flash, fill-flash with red-eye reduction, or slow sync. with red-
eye reduction (p. 26), but the live image does not reflect the flash exposure.
The camera-shake warning (p. 27) does not appear in M mode. If a slow shutter speed
is selected, noise-reduction processing is applied to the image; a message may appear
during processing. See page 39 for more on noise reduction.
Use the left/right keys of the controller to change the
aperture.