Konica Minolta CS-7, Руководство по эксплуатации

Страница: 348 / 424

348
7 .22 Other functions
7 .22 .5 Screen saver
When operation is not performed for a certain time, the
screen saver starts .
z
Login as another operator after screen sav -
er is canceled
If displaying the login screen after canceling screen
saver, it is possible to log in with another user ID .
The following procedure describes the case where the
screen saver starts up while logged in as Edward .N,
and logging in as Alan .E after canceling screen saver .
1
After canceling screen saver, input the
user ID and password of Alan .E, then
press [Login].
• A confirmation screen is displayed.
2
Press [OK] .
• Press [Cancel] to return to the previous screen.
• The initial screen for user ID of Alan .E is dis-
played .
7 .22 .6 Bar code reader and
magnetic card reader
When optional bar code reader and magnetic card
reader are used, various types of information can be
read and input .
The following are precautionary items when bar code
reader and magnetic card reader are used .
z
Bar code reader
• When placed on its special stand, the laser is al-
ways in the lit state .
• When used in the constant lit state freeing the
hands, exercise full caution that the laser is not
discharged in a direction where it will enter the
eyes of people .
• The bar code can be read in either up or down
orientation of the CR cassette .
• After pressing the trigger button, if the bar code
is not read in a certain time, the laser goes out .
When reading again, release the trigger button,
press it again, and discharge the laser .
z
Bluetooth bar code reader
• The battery lasts for about 2 days when connect-
ed to a PC via Bluetooth communication .
* Varies depending on the usage .
• When not used, connect the USB cable to
charge .
• For approximate charging time and battery re -
placement, refer to the Bluetooth bar code reader
operation manual .
• The display shifts to sleep state when there are
no operations, and screen display disappears,
however Bluetooth communication is not discon-
nected .
• Communication distance is within 10 m .
* Varies depending on the usage .
• For recovery from the Bluetooth communication
failure, refer to Bluetooth bar code reader opera-
tion manual .
• Data read with the bar code reader while Blue-
tooth communication is disconnected will not be
sent to this device .
* Accumulated data is not transferred when con-
nection is recovered .
• If bar codes are not transmitted, ID search and
screen transitions are not performed . If not yet
transitioned to the exposure screen, recover the
communication . For the recovery procedure,
refer to the Bluetooth bar code reader operation
manual .