Konica Minolta CM-3700A, Инструкция по эксплуатации

Страница: 10 / 42

8
White Calibration Plate CM-A154
Used to perform white calibration for measurement
of reflectance and to perform measurement
of transmittance. A CD-ROM containing white
calibration data and software for writing the white
calibration data is supplied with this accessory.
Target Mask CM-A91
CM-A92
CM-A93
Used to change the illumination area (measurement
aperture) according to the specimen.
Measurement and illumination (aperture area at specimen
surface) areas for each target mask are as follows:
CM-A91 (SAV)
: 3 × 5 mm / 5 × 7 mm
CM-A92 (MAV) : ø8 mm / ø11 mm
CM-A93 (LAV) : ø25.4 mm / ø30 mm
Zero Calibration Box CM-A155
Used to perform zero calibration for measurement
of reflectance and to perform haze measurement
at measurement of transmittance.
AC Adapter AC-A308
Used to supply power from an AC
outlet to the CM-3700A.
Input: 100 to 240 V
50/60 Hz
Output: 8 V 1.5 A
Plug design: Center-negative
USB Cable (3 m) IF-A21
Used to connect the instrument to
a personal computer (PC).
Accessory Case CM-A156
Dust Cover CM-A69
Standard Accessories