Konica Minolta CM-23d, Инструкция по эксплуатации

Страница: 102 / 151

99
„ User type
Settings can be protected for each user.
Memo
The user type is set to “Administrator” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “User type”,
and then press the [Confirmation] key.
The <User type> setting screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor and select the
user type.
Selections
{ Administrator: All settings can be changed.
{ Worker: Some settings cannot be changed.
Memo
The operations that workers can perform are as follows.
• “Sample” browsing/measurement/printing/deletion
• “Target” browsing/printing
• Calibration
• Instrument info. displaying
• Changing the user type
Memo
It is possible to set a password for changing workers to
administrators. For details, read P.107 “Password Setting”.
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.