Konica Minolta CA-410 Series, Инструкция по эксплуатации

Страница: 55 / 140

53
6. Menu screen
Press the [MENU] key to change probe or data processor settings.
The menu screen includes areas 1 to 3, and options for the item selected in area 1 are displayed in area 2, and options or
settings for the item selected in area 2 are displayed in area 3.
• Select an item in area 2 after selecting an item in area 1 using the [UP]/[DOWN] keys and pressing the [RIGHT] or
[ENTER] key.
• After selecting an item in area 2 using the [UP]/[DOWN] keys and pressing the [RIGHT] or [ENTER] key, the settings are
displayed or an item in area 3 can be selected. Pressing the [LEFT] or [ESC] key returns to item selection in area 1.
• After selecting an item in area 3 using the [UP] or [DOWN] key and pressing the [RIGHT] or [ENTER] key, the setting
screen for the item is displayed. Pressing the [LEFT] or [ESC] key returns to item selection in area 2.
* For items to set, refer to the Settings section.
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
NTSC
AUTO
OFF
OFF
OFF
0.07 Hz
Sync Mode
Meas Speed
Trigger Mode
Interval Meas
Interval Alert
JEITA freq resolution
Menu area 1 Menu area 2 Menu area 3
CA
-DP40