Konica Minolta CA-410 Series, Инструкция по эксплуатации

Страница: 132 / 140

130
Bluetooth Connection
3
Use the [UP] or [DOWN] key to move the
cursor to “Meter PIN”, and then press the
[ENTER] key.
The <PIN code setting> screen is displayed.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10 min ]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
Bluetooth
Set PIN code
Complete
００００
4

and

are displayed above and below
the PIN. Use the [UP] or [DOWN] key to
specify a value. Use the [LEFT] or [RIGHT]
key to move between digits.
The PIN should consist of eight numbers (0 to 9).
5
When value input is completed, press
the [ENTER] key.
The screen returns to the <Communication Setup>
screen.