Konica Minolta bizhub PRESS C71cf, Быстрое руководство, Страница: 17 / 143

1-9
bizhub PRESS C71cf
1
)
Roll Winder RW-201
REWIND MOTOR
ON
REWIND MOTOR
OFF
EMG.RESET
READY JOG STOP
2
1
3 4
5 6 7
No. Name Description
1 EMERGENCY STOP Press to stop this system in case of emergency. Use only in
case of emergency. Pressing
EMERGENCY STOP stops the
machine immediately. To reset that emergency stop status,
press
EMG.RESET and also turn EMERGENCY STOP to the
right. Do not press EMERGENCY STOP to stop usual printing.
It may result the machine and media being damaged.
2 EMG.RESET When this system stops in immediately, clear the error and con-
firm the
top cover is closed, and then press EMG.RESET to re-
set the emergency stop.
3 REWIND MOTOR ON When REWIND MOTOR ON is turned off, the machine does not
start printing. Press REWIND MOTOR ON and light REWIND
MOTOR ON to start printing.
4 REWIND MOTOR OFF Turn off REWIND MOTOR ON when printing ends.
5 STOP Stops jobs while conveying a paper and printing. Stops the
whole system.
•
The LED lights up in the emergency stop status.
• When Roll Winder RW-201 is stopped, the LED blinks.
• Press STOP while the LED flickers, the LED turns off and the
stop status is canceled.
6 READY Rotate the winding shaft of Roll Winder RW-201 alone and
convey the media. If READY is pressed while the machine is
stopped and offline, the alarm beeps for three seconds. For five
seconds after the time the alarm stops,
JOG is effective.
7 JOG When the machine is stopped and offline, you can operate the
conveyer of
Roll Winder RW-201 for five seconds from the time
READY is pressed and the alarm stops beeping. While pressing
JOG , the conveyer operates. Use the function when adjusting
the media.
If
JOG is not pressed within five seconds, or STOP is pressed,
newly press READY .